The Stages of Auto Repair

When your vehicle needs repair, there are many stages involved. Understanding these stages can help you avoid mistakes and ensure the work is done right the first time. Here are the main auto repair stages and what each means. Taking your vehicle in for service can save you money and time later. If you have questions, contact us.

Bodywork repair

There are several stages of the bodywork repair. Roughing out a panel is part of the first step. Hammering out holes and fastening studs may be necessary for this. Additionally, it might entail drilling clamp points for slide or post-pullers that use hydraulics. Repairs will need to be more complex for more severe damage. The next stage involves the reshaping and fine-tuning of metal. Finally, a skilled auto body service center will use a precision measuring system to ensure the repairs are made to the factory specification.

A good auto body repair Denver, CO, can help improve the car’s value. However, if the bodywork isn’t done correctly, the result can be worse than the initial accident. Often, the paint on a car may not match, creating a noticeable difference between panels. Therefore, a bodywork repair specialist must use proper paint-matching techniques to make a car look new again.

Once the repair work is complete, the auto body shop will reassemble the vehicle. It will also test drive it to make sure everything is working properly. The body shop will also polish the body paint and clean all surfaces.

Paint preparation

The focus of paint preparation in auto repair is to get a smooth, clean finish on the vehicle’s surface. There is no room for overspray or airborne paint particles, and the process must be performed carefully and thoroughly to avoid them. Preparing the vehicle includes washing it to remove dust, grime, and other contaminants before applying the color and clear coat.

Preparing the repair area is the first step in paint preparation. This is important because if the repair area is not blocked properly, it will show through the new paint film. To prevent this, the body shop technicians use solvents to clean the panel. If silicone or wax is not removed from the surface, it will cause the new paint to adhere poorly to the surface. In some cases, this may lead to fisheye.

Paint preparation can be done outdoors if the weather is good. First, ensure the vehicle is parked away from debris, such as branches or leaves. The process will be easier if you have the correct tools and equipment. Safety goggles and gloves protect you from breathing in harmful fumes and particles.

Detailed refinishing

Detailed refinishing refers to returning a car to its original condition. Damaged auto parts must be cleaned, sanded, and painted during this procedure. The refinisher will apply paint that is the same color as the original. The paint will then be applied until the car looks as good as new. After the vehicle has undergone the detailed refinishing process, it will be road tested to ensure proper operation.

First, the vehicle’s frame and mechanical components will be repaired. Next, the paint job will be prepared, with surfaces sanded and primed to remove imperfections and ensure a perfect match. Then the paint will be applied, starting with a base coat and a clear coat.

The final molding and other detailed pieces will then be attached to the car. After that, the vehicle’s interior and exterior surfaces will be cleaned and polished. After the paint has dried, the body shop personnel will run a test drive of the vehicle to ensure that it is free from any problems.


The auto repair industry is undergoing a major shift from on-site repair services to delivery services. Consumers are increasingly looking for convenience, and dealership-performed services are increasing their accessibility. These services allow consumers to drop their cars off and pick them up when they are finished. Repair companies are partnering with dealerships to offer these services.